METAL RE-ROOF

• Great R-value in limited spaces
• Reflects the heat and keeps the building cooler
• Prevents water infiltration

1. Pre-cut measured length of AYR-FOIL™ to span eave-to-eave, up and over the ridgeline.
2. Starting at one eave lay AYR-FOIL™ flat onto roof towards the ridge and continue down to the next side.
3. Lay the next AYR-FOIL™ course parallel to the first. If using tab products, ensure the square edge faces the tab edge of the previous course of AYR-FOIL™.
4. Seal the joints and make sure the entire roof line is covered with AYR-FOIL™.
5. Attach furring material of choice over the AYR-FOIL™ covered roof.
6. Install metal roofing over furring strips.